TM 5-3895-382-24
7.
Attach lifting straps and a hoist to engine enclosure (8)
as shown. The engine enclosure consists of the left and
right doors, the cowling and the radiator grill. Remove
eight bolts (9) that fasten the engine enclosure to the
frame, and remove the engine enclosure. The weight of
the engine enclosure is 128 kg (282 lb).
Radiator
Remove & Install Radiator
1353-010
Tools Needed
A
6V-2156
Line Brackets
2
Start By:
a.
remove engine enclosure
At operating temperature, the engine cooling system is
hot and under pressure. Steam can cause personal injury.
Check the coolant level only after the machine has
stopped and the fill cap and radiator are cool enough to
touch with the bare hand. Remove the fill cap slowly to
relieve pressure. Cooling system conditioner contains
kakali. Avoid contact with skin and eyes to prevent
personal injury.
1.
Release the pressure in the cooling system by slowly
loosening the fill cap on the radiator.
2.
Drain the coolant from the cooling system into a suitable
container. The capacity of the cooling system is
11 liters (2.9 U.S. gal).
3.
Loosen the hose clamp, and remove hose (1) from the
bottom of the radiator.
4.
Loosen the hos e clamp, and remove hose (2) from the
top of radiator (3).
5.
Attach Tooling (A) and a hoist to radiator (3) as shown.
Remove eight bolts (4) that fasten the radiator to the
hydraulic oil cooler, and remove the radiator. The
weight of the radiator is 35 kg (77 lb).
9-10
