TM 5-3895-382-24
Disassemble & Assemble Water
Separator 1263-017
Start By:
a.
remove water separator
1.
Remove valve (17) from bowl (13). Remove washer
(16) from the valve. Check the washer for wear or
damage, and replace if necessary.
2.
Loosen head (11), and remove bowl (13) from element
(8).
3.
Remove bolt (15) from bowl (13). Remove seal (14)
from the bolt. Check the seal for wear or damage, and
replace if necessary.
4.
Remove bowl (13) from head (11). Remove seals (10)
and (12) from the head. Check the seals for wear or
damage, and replace if necessary.
5.
Remove ring (9) and element (8) from filter base (4).
6.
Remove seal (7) from the filter base. Check the seal for
wear or damage, and replace if necessary.
7.
Remove nut (1) and cap (2) from the filter base.
Remove seal (3) from the cap. Check the seal for wear
or damage, and replace if necessary.
8.
Remove plug (6) from filter base (4). Remove washer
(5) from the plug. Check the washer for wear or
damage, and replace if necessary.
NOTE: For assembly of the water separator, reverse the
disassembly steps.
End By:
a.
install water separator
Fuel Filter
Remove & Install Fuel Filter
1261-010
1.
Open the engine access door on the right side of the
machine.
2.
Turn the drain valve on the bottom of the fuel filter
counterclockwise to open. Drain the fuel, water and
sediment into a suitable container. Close the drain
valve.
3.
Disconnect hose assembly (4) from fuel filter (3). Plug
and cap immediately.
4.
Disconnect five fuel lines (1) from the fuel filter. Cap
and plug immediately.
9-7
