TM 5-3895-382-24
Muffler
Remove & Install Muffler
1062-010
1.
Open the engine access doors on both sides of the
machine.
2.
Loosen the bolt, and remove clamp (1) and the exhaust
pipe from muffler (2).
3.
Remove two nuts and bolts (3) that fasten the muffler to
the bracket.
4.
Loosen bolt (4), and remove the clamp and muffler (2)
from the engine.
NOTE:
For installation of the muffler, reverse the removal
steps.
Water Separator
Remove & Install Water Separator
1263-010
1.
Open the engine access door on the right side of the
machine.
2.
Turn the drain valve on the bottom of the water
separator counterclockwise to open. Drain the water
and sediment into a suitable container. Close the drain
valve.
3.
Disconnect tube assembly (1) and hos e assembly (4)
from water separator (3). Cap and plug immediately.
4.
Remove two bolts (2), and remove water separator (3)
from the engine.
NOTE:
For installation of the water separator, reverse the
removal steps.
9-6
