TM 5-3895-382-24
20.
Disconnect hose assemblies (19) from steering pump
(20). Disconnect hose assembly (21) from the hydraulic
oil tank. Cap and plug immediately.
21.
Disconnect hose assemblies (22) and (23) from the
hydraulic oil cooler. Cap and plug immediately.
22.
Remove the two bolts that fasten plate (24) to the
shroud and hydraulic oil cooler. Move the bracket and
two hoses out of the way.
23.
Disconnect hose assemblies (26) and (27) from
vibratory pump (25). Cap and plug immediately.
24.
Disconnect hose assemblies (29) and (30) from
vibratory pump (25). Cap and plug immediately.
25.
Mark or identify all electrical wires for installation
purposes. Disconnect the two electrical wires from
neutral start switch (31). Remove the cable ties that
fasten the wiring harness to the pumps.
26.
Remove the cotter pin and pin that fastens control cable
(33) to plate (28).
27.
Loosen jam nut (32), and remove control cable (33)
from the bracket. Move the control cable out of the way.
9-14
