TM 5-3895-382-24
NOTE:
Refer to Paragraph 2-2 for Cold Starting Aid
Replacement on military models. Military models
do not have electric engine starting aids.
9.
Disconnect electrical wire (8) from the engine starting
aid. Remove the four cable ties that faster the electrical
wire to the engine.
10.
Mark or identify all electrical wires for installation
purposes. Disconnect electrical wires (9) from the
alternator.
11.
Remove the cable tie that fastens electrical harness (10)
to the engine.
12.
Disconnect electrical connector (12) from the hydraulic
oil temperature switch.
13.
Disconnect electrical connector (16) from the engine
coolant temperature switch.
14.
Disconnect electrical connector (17) from the engine oil
pressure switch.
15.
Disconnect electrical connector (18) from the engine oil
pressure switch.
16.
Mark or identify all electrical wires for installation
purposes. Disconnect two electrical wires (13) from the
fuel pump solenoid.
17.
Remove all of the cable ties that fasten electrical
harness (10) to the engine. Move the electrical harness
out of the way.
18.
Disconnect throttle cable (14) from the engine. Loosen
jam nut (15), and remove throttle cable (14) from the
bracket.
19.
Disconnect hose assembly (11) from the secondary fuel
filter. Plug and cap immediately.
9-13
