TM 5-3895-379-23-1
0195
GROUP I TERMINAL ASSEMBLY - Continued
CAUTION
Strip wire after placing it through seal and connector body to prevent damage to individual
strands.
2.
Strip end of wire (Figure 10, Item 1) using crimp tool (Figure 10, Item 3) leaving 1/4 in. (0.64 cm) of bare wire.
NOTE
When installing terminal be sure terminal wings point to the upper jaw of crimping tool.
3.
Push terminal holder open and insert terminal (Figure 10, Item 2) until attaching portion of terminal rests on
anvil.
1
2
3
M1003SWR
Figure 10.
Wiring Repair.
03/15/2011Rel(1.8)root(maintwp)wpno(M00133)