TM 5-3895-379-23-1
0195
GROUP II TERMINAL ASSEMBLY - Continued
NOTE
Wire and seal should be positioned so larger wings of terminal will crimp around seal and
smaller wings will crimp around exposed bare wire.
3.
Position wire (Figure 16, Item 3) on terminal (Figure 16, Item 2).
4.
Press handles of crimp tool together until ratchet releases and crimp is complete.
5.
Push new terminal (Figure 16, Item 2) and wire (Figure 16, Item 3) through connector (Figure 16, Item 1) until
seated.
1
2
3
M1009SWR
Figure 16.
Wiring Repair.
6.
Close two secondary locks (Figure 17, Item 2) on connector (Figure 17, Item 1).
7.
Connect connector (Figure 17, Item 1).
1
2
M1010SWR
Figure 17.
Wiring Repair.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00133)