TM 5-3895-379-23-1
0195
GROUP I TERMINAL DISASSEMBLY - Continued
NOTE
Perform Step only if old terminal is still attached to wire.
Make cut directly behind damaged terminal.
4.
Cut and remove terminal (Figure 8, Item 1) from wire (Figure 8, Item 2). Discard terminal.
5.
Remove wire (Figure 8, Item 2) and seal (Figure 8, Item 4) from connector (Figure 8, Item 3).
1
2
4
3
M1001SWR
Figure 8.
Wiring Repair.
END OF TASK
GROUP I TERMINAL ASSEMBLY
1.
Push wire (Figure 9, Item 1) through seal (Figure 9, Item 3) and cavity of connector (Figure 9, Item 2).
1
2
3
M1002SWR
Figure 9.
Wiring Repair.
03/15/2011Rel(1.8)root(maintwp)wpno(M00133)
