TM 5-3895-379-23-1
0195
GROUP I TERMINAL DISASSEMBLY
WARNING
Use caution when using removal tool. Tip of tool is very sharp. Failure to follow this warning
may cause injury.
NOTE
Locking tab on the terminal mates with molded tab in plastic connector to retain cable
assembly.
All Group I connectors are repaired the same way. Number of wires in connection may
vary.
1.
Insert tip of removal tool (Figure 7, Item 2) between locking tab (Figure 7, Item 3) of terminal
(Figure 7, Item 1) and wall of connector (Figure 7, Item 4).
2.
Release locking tab (Figure 7, Item 3) from connector (Figure 7, Item 4).
3.
Push terminal (Figure 7, Item 1) through front of connector (Figure 7, Item 4).
2
1
3
4
M1000SWR
Figure 7. Wiring Repair.
03/15/2011Rel(1.8)root(maintwp)wpno(M00133)
