TM 5-3895-379-23-1
0082
INSTALLATION - Continued
NOTE
Lubricate bolt threads with clean engine oil before assembly.
4.
Tighten 22 head bolts (Figure 7, Item 1), evenly and gradually, in numbered sequence to 80 lb-ft (108 Nm).
5.
Again tighten 22 head bolts (Figure 7, Item 1), evenly and gradually, in numbered sequence to 80 lb-ft
(108 Nm) to ensure proper torque.
6.
Tighten all head bolts and nuts in number sequence as follows:
a.
Short bolts (S) 150 degrees further (2.5 flats).
b.
Medium length bolts (M) 180 degrees further (3.0 flats).
c.
Long bolts (L) 210 degrees further (3.5 flats).
2
1
M 13
M 18
M8
M2
14 L
L 19
M9
M1
M3
M 20
M 10
M7
M 4
15 M
S 21 S
S
S
S
S
S
S
22
11 12
6
5
17
18
M1061SWR
Figure 7.
Cylinder Head Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install rocker arm and push rods. (WP 0090)
2.
3.
4.
Install intake manifold. (WP 0105)
5.
Install fuel filter base. (WP 0127)
6.
7.
Fill radiator. (WP 0139)
8.
Connect battery cables. (WP 0192)
9.
Lower operator platform assembly. (Volume 2, WP 0235)
03/15/2011Rel(1.8)root(maintwp)wpno(M00021)
