TM 5-3895-379-23-1
0083
INSPECTION
1.
Inspect counter-balance weight and crankshaft pulley for cracks or other damage. Replace if damaged.
2.
Inspect wear of pulley grooves. Replace pulley if worn.
3.
Inspect to ensure plastic mandrel and seal lip maintains the correct shape, if supplied.
END OF TASK
INSTALLATION
1.
Apply a coat of lubricating oil to exposed surface of crankshaft end (Figure 2, Item 5).
2.
If supplied, remove plastic mandrel from seal, if required.
NOTE
Position counterbalance weight to align holes with crankshaft end.
Apply sealing compound to threads of bolts.
It may be necessary to keep crankshaft from rotating when installing bolts.
3.
Position crankshaft pulley (Figure 2, Item 4) on crankshaft end (Figure 2, Item 5).
4.
Install counterbalance weight (Figure 2, Item 3) and three bolts (Figure 2, Item 2). Tighten bolt to 85 lb-ft
(115 Nm).
1
5
4
3
2
M0071SWR
Figure 2.
Crankshaft Pulley Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install alternator V-belts. (WP 0147)
2.
Install radiator. (WP 0136)
END OF TASK
END OF WORK PACKAGE
0083-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00022)
