TM 5-3895-379-23-1
FIELD MAINTENANCE
CRANKSHAFT FRONT OIL SEAL REPLACEMENT
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer 91L
Tool Kit, General Mechanic's: Automotive
(Volume 2, WP 0289, Table 1, Item 39)
Drill Bit Set Standard
References
(Volume 2, WP 0289, Table 1, Item 6)
TM 5-3895-379-23P, Figure 10
Drill, Hand (Volume 2, WP 0289, Table 1, Item 7)
Installer, Cover
(Volume 2, WP 0289, Table 1, Item 20)
Equipment Condition
Puller Kit, Universal
Crankshaft pulley removed. (WP 0083)
(Volume 2, WP 0289, Table 1, Item 27)
Materials/Parts
Gasket
(Volume 2, WP 0290, Table 1, Item 82)
Qty: 1
REMOVAL
CAUTION
Make sure main lip is used to remove crankshaft front oil seal. Do not damage edge of oil
seal housing.
1.
Drill three holes evenly spaced in crankshaft front oil seal (Figure 1, Item 1).
2.
Position slide hammer puller in holes and remove gasket (Figure 1, Item 1) from oil seal housing
(Figure 1, Item 2).
1
2
M0072SWR
Figure 1. Crankshaft Front Oil Seal Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00023)