TM 5-3895-379-23-1
0082
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death.
NOTE
Cylinder head weighs 90 lb (41 kg).
Tag and mark the short, medium, and long head bolts during removal.
1.
Remove, evenly and gradually, 22 head bolts (Figure 1, Item 1) from cylinder head (Figure 1, Item 2) in reverse
of sequence.
1
2
M 13
M8
M2
M 18
14 L
M1
L 19
M9
M3
M 20
M 10
M7
M 4
15 M
S 21 S
S
S
S
S
S
S
22
11 12
6
5
17
18
M0067SWR
Figure 1.
Cylinder Head Removal.
NOTE
Do not use pry bar to separate cylinder head from cylinder block.
Place cylinder head on a surface that will not damage cylinder head face.
2.
With assistance, attach lifting device to cylinder head (Figure 2, Item 2). Lift cylinder head straight up and off
cylinder block (Figure 2, Item 1).
03/15/2011Rel(1.8)root(maintwp)wpno(M00021)
