TM 5-3895-379-23-1
FIELD MAINTENANCE
INTAKE MANIFOLD REPLACEMENT
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer 91L (2)
Tool Kit, General Mechanic's: Automotive
(Volume 2, WP 0289, Table 1, Item 39)
Wrench, Torque, 20-100 ft-lb
References
(Volume 2, WP 0289, Table 1, Item 42)
TM 5-3895-379-10
TM 5-3895-379-23P, Figure 16
Materials/Parts
Tag, Marker
Equipment Condition
(Volume 2, WP 0288, Table 1, Item 70)
Operator platform assembly raised.
Gasket (Volume 2, WP 0290, Table 1, Item 55)
(Volume 2, WP 0235)
Qty: 1
Exhaust manifold removed (CB534B). (WP 0106)
Gasket (Volume 2, WP 0290, Table 1, Item 16)
Exhaust manifold removed (CB534C). (WP 0107)
Qty: 2
REMOVAL
NOTE
Intake manifold is replaced the same way for CB534 and CB534C Rollers, except where
noted. CB534B Roller is shown.
Tag and mark all wires prior to removal.
1.
Disconnect wire (Figure 1, Item 1) from cold start heater connector (Figure 1, Item 2).
2.
Loosen nut (Figure 1, Item 4) and disconnect fuel line (Figure 1, Item 5) from cold start heater
(Figure 1, Item 3).
1
2
5
4
3
M0129SWR
Figure 1.
Intake Manifold Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00044)