TM 5-3895-379-23-1
0105
INSTALLATION - Continued
3.
Install new gasket (Figure 5, Item 6) and intake manifold flange (Figure 4, Item 7).
4.
Install clip (Figure 5, Item 2) and for CB534B Roller, clip (Figure 5, Item 6) on intake manifold
(Figure 5, Item 1) using four bolts.
2
1
3
7
6
4
5
M1089SWR
Figure 5.
Intake Manifold Installation.
5.
Slide hose at intake manifold flange (Figure 6, Item 3) into position and tighten two hose clamps.
6.
For CB534B Roller, install clip (Figure 5, Item 5), and screw (Figure 5, Item 4) to intake manifold
(Figure 5, Item 1).
7.
Connect fuel line (Figure 6, Item 5) to cold start heater (Figure 6, Item 3) and tighten nut (Figure 6, Item 4).
8.
Connect wire (Figure 6, Item 1) to cold start heater connector (Figure 6, Item 2).
1
2
5
4
3
M1088SWR
Figure 6.
Intake Manifold Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00044)