TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
HYDRAULIC SYSTEM - CONTINUED
a. If alternator V-belt is broken,
2. Open right-side door assembly
24. Hydraulic Oil Temperature is High
component is faulty. Close
(Warning Light and Warning Horn On) -
right-side door assembly (WP
loose or broken alternator V-
Continued.
and
notify
belts.
supervisor.
b. If alternator V-belts are loose,
close right-side door assembly
(WP 0005 00). Notify
supervisor.
c. If alternator V-belts are not
loose or broken, go to Step 3.
a. If air flow through radiator is
3. Check for air flow restriction
restricted, remove restrictions.
in radiator and hydraulic oil
If
unable
to
remove
cooler.
restrictions, close right-side
door assembly (WP 0005 00)
and notify supervisor.
b. If air flow through radiator is
not restricted and material
being compacted is not too
hard, close right-side door
assembly (WP 0005 00). Fault
is not corrected. Notify
supervisor.
25. Hydraulic Oil Pressure is Low (Warning
Check hydraulic oil level (WP
a. If hydraulic oil level is low, fill
Light and Warning Horn On).
hydraulic oil tank (WP 0018
b. If hydraulic oil level is not low,
fault is not corrected. Notify
supervisor.
STEERING
Check hydraulic oil level (WP
a. If hydraulic oil level is low, fill
26. Power Steering Pump Makes Noise and
hydraulic oil tank (WP 0018
Steering Cylinder Rods Do Not Move
Smoothly.
b. If hydraulic oil is not low, fault
is not corrected. Notify
supervisor.
