TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING - CONTINUED
27. Too Much Force Is Needed to Turn Steering
Check hydraulic oil level (WP
a. If hydraulic oil is low, fill
Wheel.
hydraulic oil tank (WP 0018
b. If hydraulic oil level is not low,
fault is not corrected. Notify
supervisor.
28. Roller Does Not Turn When Steering Wheel
Check hydraulic oil level (WP
a. If hydraulic oil level is low, fill
is Turned.
hydraulic oil tank (WP 0018
b. If hydraulic oil level is not low,
fault is not corrected. Notify
supervisor.
29. Roller Turns Slowly in Both Directions.
Check hydraulic oil level (WP
a. If hydraulic oil level is low, fill
hydraulic oil tank (WP 0018
b. If hydraulic oil level is not low,
fault is not corrected. Notify
supervisor.
PROPEL SYSTEM
a. If parking brake is engaged,
30. Roller Will Not Move When Propel Control
1. Check that parking brake is not
pull parking brake switch up to
Lever Is Operated.
engaged (parking brake switch
release parking brake.
is illuminated while parking
brake is engaged).
b. If parking brake is
not
engaged, go to Step 2.
Move propel control lever to
2. Check that parking brake
neutral. Press down, then pull up
switch was not released with
parking brake switch. If symptom
propel control lever out of
persists, go to Step 3.
neutral.
