TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
a. If fuse filament is broken,
14. Starter Turns But Does Not Crank Engine -
2. Turn
fuse
holder
cap
notify
supervisor
for
Continued.
counterclockwise and remove
replacement. Install fuse and
cap and fuse from fuse holder
cap in fuse holder.
labeled KEY START. Inspect
fuse for broken filament.
b. Fault is not corrected. Notify
supervisor.
a. If fuse filament is broken,
15. Warning and Indicator Lights Do Not
Turn
fuse
holder
cap
notify
supervisor
for
Operate.
counterclockwise and remove
replacement. Install fuse and
cap and fuse from fuse holder
cap in fuse holder.
labeled GAUGES. Inspect fuse
for broken filament.
b. If fuse filament is not broken,
fault is not corrected. Install
fuse and cap in fuse holder and
notify supervisor.
a. If fuse filament is broken,
16. Starting Aid Switch Does Not Work
For CB534B Roller only, turn
notify
supervisor
for
(CB534B Roller Only).
fuse holder cap counterclockwise
replacement. Install fuse and
and remove cap and fuse from
cap in fuse holder.
fuse holder labeled START AID.
Inspect fuse for broken filament.
b. If fuse filament is not broken,
fault is not corrected. Install
fuse and cap in fuse holder and
notify supervisor.
a. If fuse filament is broken,
17. Backup Alarm Does Not Work.
Turn
fuse
holder
cap
notify
supervisor
for
counterclockwise and remove
replacement. Install fuse and
cap and fuse from fuse holder
cap in fuse holder.
labeled BACKUP ALARM.
Inspect fuse for broken filament.
b. If fuse filament is not broken,
fault is not corrected. Install
fuse and cap in fuse holder and
notify supervisor.
If alternator indicator is still on,
18. Alternator Indicator Is On.
Open left-side door assembly
fault is not corrected. Close left-
side door assembly (WP 0005
alternator circuit breaker button.
