SECTION 8
FINAL DRIVE AND TRANSFER CASE
FIGURE 8-5.
FIGURE 8-3.
FIGURE 8-6.
FIGURE 8-4.
c. Remove/the parking brake.
(5). Remove the capscrews from the backing
plate and remove the backing plate.
(1). Remove the capscrews from the drum and
d. Remove the capscrews and the two (2)
remove the drum (see figure 8-5).
Allen head screws from the rear pinion shaft
bearing retainer. Remove the retainer and
(2). Remove the brake shoes and pivot plate.
shims (see figure 8-7).
(3). Remove the castle nut. It will be
e. Remove the bearing cup, preferably with a
necessary to clamp onto the spline hub at the
press.
opposite end of the pinion shaft to keep the
shaft from turning (see figure 8-8).
f. Pull the bearing. Start with a drift, then
apply a puller.
(4). Remove the hub and spacer.
8-2.