SECTION 8
FINAL DRIVE AND TRANSFER CASE
g. The pinion shaft with the pinion and
c. Remove the yoke.
forward bearing still installed may be removed
by pushing it back through the rear bearing
d. Press the shaft, gear and Inboard bearing
bore and then tilting the forward end downward
from the outboard bearing and retainer (see
and through the lower bore (see figure 8-8).
h. The cup may be removed.
e. Press the shaft from the gear and inboard
bearing (see figure 8-12).
8-12. DISASSEMBLY OF GEAR ASSEMBLY.
f. Remove the cups from the retainer.
a. Unstake and remove the nut at the end of
the gear shaft (see figure 8-9).
8-13. DISASSEMBLY OF PINION SHAFT.
b. Remove the o-ring from the spacer and
a. Press the shaft from the pinion (see
remove the spacer (see figure 8-10).
FIGURE 8-7.
FlGURE 8-9.
FIGURE 8-10.
FIGURE 8-8
8-3.