SECTION 8
FINAL DRIVE AND TRANSFER CASE
8-17. REASSEMBLY OF PINION SHAFT.
a. Assemble the spacer, pinion and forward
bearing onto the pinion shaft (see figure 8-18).
b . Install the rear bearing onto the pinion
shaft (see figure 8-19).
c. install the cup for the forward bearing.
d . Put the assembled pinion shaft through
t h e lower bearing retainer bore. Project it
through the rear bearing bore and bring it into
position (see figure 8-20).
FIGURE 8-15.
FIGURE 8-18.
FIGURE 8-16.
FlGURE 8-17.
FIGURE 8-19.
8-5.
