TM 5-3895-346-14
POWER STEERING
STEERING CONTROL DISASSEMBLY
Figure 14.
Figure 16.
Figure 15.
Figure 17.
Upend the housing and tap slightly with butt of hand. Hold check valve hole toward lowest corner and remove
check valve seat, ball, and spring (refer to Fig. 16).
In spool assembly, push the cross pin to loosen from spool sleeve assembly (refer to Fig. 17).
Remove cross pin and set aside (refer to Fig. 18).
Push the inside, lower edge of spool so that spool moves towards splined end and remove carefully from
sleeve (refer to Fig. 19 and 20).
581