TM 5-3895-346-14
STEERING CONTROL DISASSEMBLY
POWER STEERING
Figure 10.
Figure 12.
Figure 11..
Figure 13.
Be extremely careful to prevent these parts from binding as they are very closely fitted and must generally be
rotated slightly as they are withdrawn (refer to Fig. 13).
Using a small, bent tool or wire, the check valve seal plug can be removed by pushing on it, reaching it through
the out port. Do not pry against edge of hole in housing bore (refer to Fig. 14).
Place housing in vise, control end up, and unscrew check valve seat with 3/16 hex wrench (refer to Fig. 15).
580
