TM 5-3895-346-14
STEERING CONTROL DISASSEMBLY
POWER STEERING
STEERING CONTROL DISASSEMBLY
Place the unit in vise, control end up. Clamp across port surface and opposite side of housing lightly. Remove
the two capscrews that fasten column to lower unit. Remove column and set aside. (Mark the two capscrew
holes so that the ports will be in the proper direction when reassembled.) (Refer to Fig. 1, 2, and 3.)
Clamp unit in vise across mounting plate edges with meter end up and remove seven capscrews (refer to Fig.
4).
Remove control assembly from vise and check for free rotation of the control spool and sleeve parts with
column shaft (refer to Fig. 7).
Figure 4.
Figure 2.
Figure 3.
Figure 5.
578
