TM 5-3895-383-24
Governor
Remove & Install Governor 1286-010
Tools Needed
A
B
C
6V-0006
Dive Group
1
9U-7271
Driver Group
1
1
1U-7523
Seal Driver
1
* Part of a 128-822 3114 & 3116 Fuel System & Governor Tool
Group
Start By:
a.
remove fuel shutoff solenoid
Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and
repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or
disassembling any component containing fluids. Refer to
"Tools And Shop Products Guide", NENG2500 for tools and
supplies suitable to collect and contain fluids in Caterpillar
machines. Dispose of fluids according to local regulations and
mandates.
1.
Remove the governor control cable (linkage).
2.
Remove the engine oil tube assembly (1), the fuel tube
assembly (2) and the fuel ratio control tube assembly
(3), if equipped. Cap and plug all connections.
3.
Remove the clip (4). Use Tool (A) to slide sleeve (5)
into the cylinder head assembly.
4.
Remove the clip and use Tool (B) to remove the clevis
pin (6).
8-14