TM 5-3895-383-24
Engine Oil Filter, Engine Oil
Filter Base & Engine Oil Cooler
Remove & Install Engine Oil Filter,
Engine Oil Filter Base & Engine Oil
Cooler 1318,1306 & 1378-010
Tools Needed
A
2P-8250 Strap Wrench
1
Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and
repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or
disassembling any component containing fluids. Refer to
"Tools And Shop Products Guide", NENG2500 for tools and
supplies suitable to collect and contain fluids in Caterpillar
machines. Dispose of fluids according to local regulations and
mandates.
Typical Example
1.
Using Tool (A), remove engine oil filter (1).
2.
Remove five bolts (2) and the washers that hold the
engine oil filter base to the engine oil cooler. Remove
the engine oil filter base and three O-ring seals.
Typical Example
3.
Remove plug (3), valve spring (4) and bypass valve (5)
from the engine oil filter base. Remove the O-ring seal
from plug (3).
Typical Example
4.
Disconnect tube assembly (6) from the engine oil cooler.
5.
Remove 15 bolts (7) and the washers that hold the
engine oil cooler to the cylinder block.
8-10
