TM 5-3895-382-24
Disassemble Drum Gear Reducer
(CS-433C & CP-433C) 5655-015
Tools Needed
A
126-6608
Spanner Socket
1
Start By:
a.
remove drum gear reducer (CS-433C & CP-433C)
1.
Remove 20 bolts (9), and remove cover (1) and O-ring
seal (11) from ring gear (12). Check the O-ring seal for
wear or damage and replace if necessary.
2.
Remove thrust washer (2), sun gear (3) and bearing
thrust washer (4) from the first stage carrier. Thrust
washer (2) and bearing thrust washer (4) may have
stuck to the cover when it was removed.
3.
Remove first stage carrier (5) from the ring gear.
4.
Remove sun gear (6) from the second stage carrier.
5.
Remove second stage carrier (10) from ring gear (12).
6.
Remove ring gear (12), O-ring seal (13) and two dowel
pins (7) from housing (8). Check the O-ring seal for
wear or damage and replace if necessary.
16-28
