TM 5-3895-382-24
17.
Install and tighten 11 M5 X 0.8 X 20 mm sockethead
screws (47) in thrust plate (45) to compress nine springs
(44) and relieve the spring pressure on retaining ring
(46).
18.
Remove retaining ring (46) from spindle (32).
19.
Remove piston (43) from the spindle.
20.
Remove back-up ring (51) and O-ring seal (52) from
spindle (32). Remove back-up ring (42) and O-ring seal
(41) from the spindle.
21.
Remove six plates (49), seven discs (50) and end plate
(48) from spindle (32).
22.
Slowly and evenly loosen and remove 11 sockethead
screws (47) to relieve the spring pressure on thrust plate
(45). Remove the thrust plate and nine springs (44)
from piston (43).
16-31
