TM 5-3895-382-24
10.
Remove the four bolts that fasten each of the rubber
mounts (12) to plates (11). Remove the six rubber
mounts from the plates.
11.
Remove the two bolts that fasten each of the three
plates (11) to drum assembly (7). Remove the three
plates from the drum assembly.
NOTE:
For installation of the drum gear reducer, reverse
the removal steps.
NOTE:
After the drum gear reducer has been installed, fill
the drum gear reducer with oil to the correct level.
See the Operation & Maintenance Manual for the
correct procedure.
End By:
a.
install drum assembly
16-27
