TM 5-3895-382-24
9.
Remove five retaining rings (29) from spindle (32).
Remove gear (30) and roller bearings (31) from each of
the five spindle sections.
10.
Remove thrust spacer (36) and coupling (37) from
inside housing (8). Remove external retaining ring (33)
and internal retaining ring (35) from the coupling.
11.
Use Tool (A) to remove bearing nut (38) from the
spindle.
12.
Turn the housing and spindle over. Use a soft hammer
to tap on the flange of housing (8). Separate housing
(8) and bearing cone (39) from spindle (32).
13.
If necessary, remove bearing cups (26) and (40) from
housing (8).
14.
Remove bearing cone (27) from spindle (32).
15.
Remove duo-cone seals (28) and (34) from the spindle.
16.
Turn the spindle over.
16-30