TM 5-3895-382-24
37.
Remove four bolts (48), and remove air cleaner housing
(47) from the hydraulic oil tank.
38.
Attach a hoist to engine (49) as shown. Remove four
nuts and bolts (50) that hold the engine to the frame of
the machine.
39.
Make sure all necessary hose assemblies and electrical
wires have been disconnected. Carefully remove the
engine, radiator, hydraulic oil cooler and pumps as a
unit from the machine. The weight of the engine,
radiator, hydraulic oil cooler and pumps as a unit is
726 kg (1600 lbs).
NOTE:
For installation of the engine, reverse the removal
steps.
NOTE:
After the engine has been installed, fill the cooling
system with coolant to the correct level. Fill the
hydraulic oil tank to the correct level. See the
Operation & Maintenance Manual for the correct
filling procedures.
9-16
