TM 5-3895-382-24 4. If a new camshaft gear is used, check the backlash of the  camshaft  gear.    The  minimum  backlash  for  a  new gear is 0.08 mm (.003 inch). End By: a. Install  the  front  cover.    Refer  to  Disassembly  and Assembly, "Front Cover - Install". b. Install the fan.  Refer to Disassembly and Assembly, "Fan - Remove and Install". Camshaft Bearings - Remove and Install SMCS Code: 1211-010 Removal Procedure Table 30 Required Tools Part Tool Number Part Description Qty Camshaft Bearing Tool 8S-2241 Group 1 A 8H-0684 Ratchet Wrench 1 Start By: a. Remove  the  camshaft.    Refer  to  Disassembly  and Assembly, "Camshaft - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants    may    cause    rapid    wear    and    shortened component life. Illustration 178 Illustration 179 1. Use Tool (A).  Apply  4C-5591  Anti-Seize  Compound to the threads of Tool (A). 2. Remove   camshaft   bearings   (1)   from   the   cylinder block. Installation Procedure Table 31 Required Tools Part Tool Number Part Description Qty Camshaft Bearing Tool 8S-2241 Group 1 A 8H-0684 Ratchet Wrench 1 NOTICE Keep all parts clean from contaminants. Contaminants    may    cause    rapid    wear    and    shortened component life. Illustration 180 7-70