TM 5-3895-382-24
Illustration 60
1.
Remove exhaust manifold nuts (1) in reverse order of
the numbered sequence.
2.
Remove exhaust manifold (2) from the engine.
Illustration 61
Typical example
3.
Remove two exhaust manifold gaskets (3) from the
engine.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
Illustration 62
Typical example
1.
Inspect the condition of the gaskets. If the gaskets are
damaged, use new parts for replacement. Install
exhaust manifold gaskets (3) on the cylinder head.
Illustration 63
Typical example
Illustration 64
NOTICE
Damage to the exhaust manifold can occur if the exhaust
manifold is not aligned and tightened correctly.
7-26
