TM 5-3895-382-24
Turbocharger - Disassemble
SMCS Code: 1052-015
Disassembly Procedure
Start By:
a.
Remove the turbocharger. Refer to Disassembly and
Assembly, "Turbocharger - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
NOTICE
Care must be taken to ensure that fluids are contained
during performance of inspection, maintenance, testing,
adjusting and repair of the product. Be prepared to collect
the fluid with suitable containers before opening any
compartment or disassembling any component containing
fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools
and Shop Products Guide" for tools and supplies suitable
to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and
mandates.
1.
Place an index mark on all of the components for the
assembly procedure.
Illustration 47
Typical example
2.
Remove elbow (1) and the O-ring seal.
3.
Remove two bolts (2).
4.
Remove hose assembly (3) and the gasket.
Illustration 48
Typical example
5.
Remove six bolts (4).
6.
Remove three clamps (5).
7.
Separate compressor housing (6) from cartridge (7).
Illustration 49
Typical example
Illustration 50
Typical example
8.
Remove six bolts (8).
9.
Remove three clamps (9).
10.
Separate cartridge (7) from turbine housing (10).
7-22
