TM 5-3895-382-24
Turbocharger - Assemble
SMCS Code: 1052-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
1.
Inspect the condition of the gaskets. Replace the
gaskets, if necessary.
Illustration 51
Typical example
Illustration 52
Typical example
2.
Assemble cartridge (7) and turbine housing (10).
3.
Install three clamps (9).
4.
Apply 5P-3931 Anti-Seize Compound to six bolts (8).
Tighten the bolts to a torque of 19 ±1 N m (14±1 Ib-ft).
Illustration 53
Typical example
5.
Assemble compressor housing (6) and cartridge (7).
6.
Install three clamps (5).
7.
Apply 5P-3931 Anti-Seize Compound to six bolts (4).
Tighten the bolts to a torque of 15 ±4 N m (113 Ib-ft).
Illustration 54
Typical example
8.
Install hose assembly (3) and the gasket.
9.
Install two bolts (2).
10.
Install elbow (1) and the O-ring seals.
End By:
a.
Install the turbocharger. Refer to Disassembly and
Assembly, "Turbocharger - Install".
7-23
