TM 5-3895-382-24
Turbocharger - Install
SMCS Code: 1052-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
1.
Inspect the condition of all gaskets. Replace the
gaskets, if necessary.
Illustration 55
Typical example
2.
Install turbocharger (3) and the gaskets.
3.
Install three bolts (7).
Illustration 56
Typical example
4.
Apply 5P-3931 Anti-Seize Compound to nuts (5).
Tighten the nuts to a torque of 55 ±5 N m (40 ±4 Ib-ft).
5.
Install the gasket and oil return line (6).
6.
Install two bolts (4).
7.
Slide hose (2) onto the turbocharger (3).
8.
Tighten two clamps (1).
Exhaust Manifold - Remove and Install (Type 1
Engines and 9RM Engines) SMCS Code: 1059-010
Removal Procedure
Start By:
a.
Remove the turbocharger. Refer to Disassembly and
Assembly, "Turbocharger - Remove".
NOTE:
For a complete description of Type 1 and Type 2
Engines, refer to the Disassembly and Assembly,
"Engine Design" topic.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component lie.
7-24
