TM 5-3895-379-23
FLYWHEEL HOUSING REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
TM 5-3895-379-23P, Figure 6
Tool kit, general mechanic's (Item 36, WP 0220 00)
Shop equipment, general purpose (Item 30, WP
Personnel Required
Two
Link brackets (Item 20, WP 0220 00)
Equipment Condition
Lifting device, 70 lb (32 kg) minimum capacity
Engine assembly removed (WP 0162 00)
Materials/Parts
Starter removed (WP 0066 00)
Flywheel assembly removed (WP 0168 00)
Seal, felt
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of flywheel housing is 70 lb. (32 kg).
1.
Set engine on flat level surface and support engine for-
1
2
ward of flywheel housing.
2.
Remove two mounting bolts (1) on top of flywheel
housing (2).
401-962
