TM 5-3895-379-23
FLYWHEEL ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
TM 5-3895-379-23P, Figure 5
Tool kit, general mechanic's (Item 36, WP 0220 00)
Personnel Required
Shop equipment, general purpose (Item 30, WP
Two
Equipment Condition
Link bracket (Item 19, WP 0220 00)
Starter assembly removed (WP 0066 00)
Lifting device, 120 lb (54 kg) minimum capacity
Vibratory and propel pumps removed (WP 0187
Guide bolts, 1/2 x 4 x 20
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
1,2
3
Weight of flywheel assembly is 120 lb
(54 kg).
1.
Remove two bolts (1) and washers (2) from fly-
wheel assembly (3).
401-2235
