TM 5-3895-379-23
ENGINE ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Three
Tool kit, general mechanic's (Item 36, WP 0220 00)
Shop equipment, general purpose (Item 30, WP
Equipment Condition
Engine cool
Plate, blocking (Item 3, WP 0220 00)
Operator platform assembly raised (WP 0128 00)
Engine stand, 2,000 lb (907 kg) minimum capacity
Fan and fan guard removed (WP 0059 00)
Lifting device, 2,000 lb (907 kg) minimum capacity
Air cleaner removed (WP 0032 00)
Materials/Parts
Service meter removed (CB534B Roller) (WP
Cap set, protective (Item 8, WP 0219 00)
NATO connector removed (WP 0106 00)
Oil, lubricating (Item 26, WP 0219 00)
Fuel shut-off valves in the OFF position (WP 0038
Rag, wiping (Item 31, WP 0219 00)
Tag, marker (Item 37, WP 0219 00)
Hydraulic tank drained (WP 0037 00)
Wooden blocks
Radiator drained (WP 0052 00)
References
Muffler removed (WP 0048 00)
Battery disconnect switch removed (WP 0104 00)
TM 5-3895-379-23P, Figure 1
WARNING
Check coolant level only after engine has been stopped and fill cap and radiator are cool enough to touch
with bare hand. Remove fill cap slowly to relieve pressure. Cooling system conditioner contains alkali.
Avoid contact with skin and eyes to prevent injury.
