TM 5-3895-379-23-1
0085
INSTALLATION
NOTE
The crankshaft rear seal is lubricated by the manufacturer. Do not lubricate seal or crankshaft
flange prior to installation.
1.
Using seal installer (Figure 2, Item 2) and suitable press, install crankshaft rear seal (Figure 2, Item 3) into
housing assembly (Figure 2, Item 1).
2
3
1
M0074SWR
Figure 2.
Crankshaft Rear Oil Seal Installation.
2.
Position seal installer (Figure 3, Item 5) onto crankshaft flange.
3.
Install new gasket (Figure 3, Item 2) to cylinder block dowels (Figure 3, Item 4).
4.
Install housing (Figure 3, Item 1) and new oil seal (Figure 3, Item 3) as an assembly on the two cylinder block
dowels (Figure 3, Item 4). Remove seal installer (Figure 3, Item 5).
1
1
4
3
2
5
3
M0075SWR
Crankshaft Rear Oil Seal Installation.
Figure 3.
03/15/2011Rel(1.8)root(maintwp)wpno(M00024)