TM 5-3895-379-23-1
0084
CLEANING
Clean oil seal housing.
END OF TASK
INSPECTION
Inspect for any damage to oil seal housing and front of engine block.
END OF TASK
INSTALLATION
CAUTION
Make sure spring loaded lip of oil seal is facing towards inside of timing case cover and is
square to bore of seal housing.
NOTE
Lubricate oil seal and crankshaft pulley area that contacts new oil seal with clean engine oil.
Using front seal installer, install new gasket (Figure 2, Item 1) in oil seal housing (Figure 2, Item 2).
1
2
M1124SWR
Figure 2. Crankshaft Front Oil Seal Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
Install crankshaft pulley. (WP 0083)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00023)
