TM 5-3895-379-23-1
0085
REMOVAL
NOTE
Removal and installation procedures are the same for the CB534B and CB534C Rollers. The
CB534C Roller shown has a 14-bolt housing assembly. The CB534B Roller has a 10-bolt
housing.
1.
Remove 12 bolts (Figure 1, Item 1), two socket head bolts (Figure 1, Item 6), and washers (Figure 1, Item 7)
from housing assembly (Figure 1, Item 2).
2.
Remove crankshaft rear oil seal (Figure 1, Item 4), gasket (Figure 1, Item 3), and housing assembly
(Figure 1, Item 2) from cylinder block dowels (Figure 1, Item 5). Discard gasket.
1
2
5
4
3
2
6, 7
M0073SWR
Figure 1. Crankshaft Rear Oil Seal Removal.
END OF TASK
CLEANING
Ensure all parts and surfaces of the engine block are clean and free of oil, grease, and dirt.
END OF TASK
INSPECTION
Inspect all parts and surfaces for damage and cracks. Replace as required.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00024)
