TM 5-3895-383-24
CS-563D & CP-563D
CS-583D
4.
Disconnect three hose assemblies (3) from vibratory
motor (4). Cap and plug immediately.
5.
If equipped, remove the two bolts that fasten bracket (2)
to the plate. Slide the rubber boot down the wiring
harness. Mark the two electrical wires for installation
purposes. Disconnect the two electrical wires from the
vibratory sensor.
CS-563D & CP-563D
CS-583D
6.
Disconnect five hose assemblies (5) from drum propel
motor (6) and the drum gear reducer. Cap and plug
immediately. Remove the hose assemblies from
clamps (7).
7.
Remove two bolts (9) and plate (8) from both sides of
the drum. Move the hose assemblies and wiring
harness out of the way.
14-85