TM 5-3895-383-24
32.
Install O-ring seal (9) in adapter ring (8).
33.
Install adapter ring (8) and coupling (7).
34.
Place two pumps together. Install two bolts (6).
35.
Install connector rod (5). Install two washers and nuts
(4).
36.
Install three hoses (1). Install hub (3) and bolt (2).
End by:
a.
install propel pumps
NOTE:
After the propel pumps have been installed on the
machine, it will be necessary to adjust the propel
pump. Perform the "Propel Pump Relief Valve
Test", the "Charge Relief Valve Pressure Test",
the "Propel Pump Neutral Swashplate Pressure
Test", the "Pump Synchronization Test", and the
"Pressure Override Relief Valve Test", Form No.
KENR7025.
14-53
