TM 5-3895-383-24
c.
Place cylinder block assembly (32) in position on Tool
(A) and port plate (17). Make sue the cylinder block
assembly is seated properly on the alignment plug
[Tool (A)] and the port plate.
d.
Make sure there are no shims or belville springs in
balljoint (46). Install Tool (B) in balljoint (46) as
shown.
e.
Place balljoint (47), with Tool (B), in position on
cylinder block assembly (32) as shown.
f.
Place plate (45) in position on balljoint (46) as shown.
g.
Bolt Tool (C) to Tool (D) as shown.
h.
Place the assembled tool into the spined bores of
balljoint (46), cylinder block assembly (32) and on
plate (45) as shown. Make sure the tool is properly
seated in balljoint (46), cylinder block assembly (32)
and on plate (45).
14-49
