TM 5-3895-383-24
d.
Remove O-ring seal (15) from plug (14). Check the
O-ring seal for wear or damage and replace if
necessary.
e.
Remove plug (31), spring (29), guide (28) and spool
(27) from valve body (26).
f.
Remove O-ring seal (30) from plug (31). Check the
O-ring seal for wear or damage and replace if
necessary.
3.
Remove the eight bolts, and remove end cover (7) from
housing (1).
4.
Remove control lens (5) from end cover (7).
5.
Remove plug (32), throttle screw (35), throttle pin (36)
and throttle screw (38) from end cover (7). Check the
O-ring seal for wear or damage and replace if
necessary.
6.
Remove plug (33), throttle screw (37), check valve
shuttle (39) and throttle screw (40) from the end cover.
Check the O-ring seal for wear or damage and replace if
necessary.
7.
Remove plug (34), throttle screw (42), check valve
shuttle (43) and throttle screw (44) from the end cover.
Remove O-ring seal (41) from plug (34). Check the
O-ring seal for wear or damage and replace if
necessary.
8. Remove swivel trunnion (55) from stroking piston (58).
9. Remove plug (56), and remove stroking piston (58) from
end cover (7). Remove O-ring seal (57) from plug (56).
Check the O-ring seal for wear or damage and replace if
necessary.
10.
Remove plug (45), spring (47) and spool (48) from end
cover (7). Remove O-ring seal (46) from plug (45).
Check the O-ring seal for wear or damage and replace If
necessary.
11. Remove plug (50) from end cover (7). Remove O-ring
seal (49) from plug (50). Check the O-ring seal for wear
or damage and replace if necessary.
12. Remove retaining ring (51), and remove control bushing
(52) from the end cover.
13. If necessary, remove two dowel pins (53) from end
cover (7).
14. Remove three O-ring seals (54) in end cover (7).
14-56
