TM 5-3895-382-24
8.
Remove rear bearing (12) with a suitable puller.
9.
Remove terminal nuts (13), (14), (15) and (16).
Remove all of the washers and insulators.
10.
Remove two screws (17). Remove the stator and
rectifier assembly from the rear frame. Remove the
remaining insulators from the terminal studs.
11.
Unsolder the four stator leads and separate rectifier (18)
from stator (19).
NOTE:
To
assemble
the
alternator,
reverse
the
disassembly steps.
End By:
a.
install alternator.
8-7/(8-8 blank)
