TM 5-3895-379-23
CRANKSHAFT REAR OIL REPLACEMENT - CONTINUED
0166 00
REMOVAL
1.
Remove twelve bolts (1), two socket head bolts (2) and washers (3) from housing assembly (4).
2.
Remove crankshaft rear oil seal (5), gasket (6) and housing assembly (4) from cylinder block dowels (7). Discard gas-
ket.
1
4
5
6
7
4
2,3
401-1688
401-1689
CLEANING AND INSPECTION
1.
Ensure all parts and surfaces of the engine block are clean and free of oil, grease and dirt.
2.
Inspect all parts and surfaces for damage and cracks, replace as required.
INSTALLATION
NOTE
The crankshaft rear seal is lubricated by the manufacturer. Do not lubricate seal or crankshaft flange
prior to installation.
1.
Using seal installer (8) and suitable press, install
8
4
5
crankshaft rear seal (5) into housing assembly (4).
401-1690
0166 00-2
