TM 5-3895-379-23
DATA PLATE AND DECAL REPLACEMENT
THIS WORK PACKAGE COVERS
Data Plate: Replacement, Decal Replacement
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 36, WP 0220 00)
Engine off (TM 5-3895-379-10)
Shop equipment, common no. 1 (Item 28, WP 0220
Drums chocked (TM 5-3895-379-10)
Battery disconnect switch in OFF position (TM 5-
Materials/Parts
3895-379-10)
Cleaning compound, solvent (Item 9, WP 0219 00)
Right-side door assembly open (TM 5-3895-379-
10)
Cloth, cleaning (Item 10, WP 0219 00)
DATA PLATE REPLACEMENT
WARNING
Wear eye protection when drilling out rivets. Failure to do so could result in injury.
CAUTION
Avoid using a twist drill with an excessively large diameter when drilling out rivets. Failure to follow this
caution could result in enlarged holes in roller, too large for rivet size needed.
1.
Drill out four rivets (1) from data plate (2). Discard
rivets.
2.
Remove data plate (2) from roller.
3.
Position data plate (2) to existing holes in roller.
4.
Install data plate (2) with four new rivets (1).
1
2
401-679
