TM 5-3895-379-23
RIFLE MOUNTING BRACKET REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool kit, general mechanic's (Item 36, WP 0220 00)
TM 5-3895-379-23P, Figure 109
Shop equipment, common no. 1 (Item 28, WP 0220
Equipment Condition
Engine off (TM 5-3895-379-10)
Materials/Parts
Drums chocked (TM 5-3895-379-10)
Locknut (4)
REMOVAL
1.
Remove four locknuts (1), screws (2), washers (3) and rifle mount bracket (4) from four clamps (5). Discard locknuts.
2.
Remove four clamps (5) from hand rail assembly (6).
4
2
1
3
5
6
401-733
INSTALLATION
1.
Position four clamps (5) on hand rail assembly (6).
2.
Install rifle mount bracket (4) on four clamps (5) with four screws (2), washers (3) and new locknuts (1). Tighten lock-
nuts to 14-22 lb-ft (19-30 Nm).
3.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
